Micro Controle – Automação Electrónica, Lda.

Products

Switching relay for alternating control of two electric pumps with manual timing – RAL 202 TEO

Alternating Relay – 2 pumps – programmable timing

This product is currently out of stock and unavailable.

Product description

Switching relay for alternating control of two electric pumps with manual timing (3 – 520 sec.)
Control signals by closing contact, pressure switch and internal timing


Applications

  • Alternating control of two electropumps
  • Control signals by closing contact, pressure switch and internal timing

Operation

MODE A and B – (shunt 8-6)

During each actuation of input “P1”, alternately output “S1” and “S2”. If a “P2” action appears during the “P1” operation, it will also switch on the other output.

MODE C – (pre-programmed at the factory)

During each actuation of input “P1”, alternately output “S1” and “S2”. If a “P2” action appears during the “P1” operation, it will also switch on the other output.
When the “P1” input remains active longer than “t” set on the front panel button (3 to 520 sec. Scale), it will switch on the available output (“S1” or “S2”). This remains on while “P1” remains active.

Note: The images shown may not correspond completely to the product described.

Additional information

Weight210 g
Dimensions11 x 8.5 x 5.2 cm
Sensitivity adjustable

[3, 520] sec.

Room temperature

[-10ºC, +55ºC]

Relé de saída

AC 8A-250V / 50Hz – 1250VA DC 5A-24 V (C.R.)

Power

AC (24V, 230V, 400V) / 50Hz

Consumption

2VA (approx.)

Supply

12V DC, 24V AC, 230V AC, 400V AC

Fitting

11-pin base

Micro Controle - Automação Electrónica, Lda.